Browning Hi-Power( .357 SIG ) pistol cartridge

The .357 SIG pistol cartridge is the product of Swiss-German firearms manufacturer SIG-Sauer, in cooperation with the American ammunition manufacturer Federal Cartridge. While it is based on a .40 S&W case necked down to accept 0.355-inch (9.0 mm) bullets, the .357 SIG brass is slightly longer (0.009-inch (0.23 mm) to 0.020-inch (0.51 mm)). The cartridge is used by a number of law enforcement agencies and has a good reputation for both accuracy and stopping power.
Developed in 1994, the new cartridge was named "357" to highlight its purpose: to duplicate the performance of 125-grain (8.1 g) .357 Magnum loads fired from 4-inch (100 mm) barreled revolvers, in a cartridge designed to be used in a semi-automatic pistol. Performance is similar to the 9x23mm Winchester.
The .357 SIG provided a self-defense cartridge close in performance to a 125 gr .357 Magnum, but from a semi-automatic pistol with greater ammunition capacity.
Other than specialized competition cartridges like the 9x25mm Dillon (1988), necking a 10mm Auto case down to a 9mm bullet, the .357 SIG was the first modern bottleneck commercial handgun cartridge since the early 1960s, when Remington introduced the unsuccessful .22 Remington Jet (1961), which necked a .357 Magnum case down to a .22 caliber bullet, and the .221 Remington Fireball (1963). Soon after the .357 SIG, other bottleneck commercial handgun cartridges appeared: the .400 Corbon (1996), necking the .45 ACP down to .40 caliber; the .440 Corbon (1998), necking down the .50 AE to .44 caliber; the .32 NAA (2002), necking the .380 ACP down to .32 caliber; and the .25 NAA (2004), necking the .32 ACP down to .25 caliber

The .357 SIG has 1.27 ml (19.5 grains) H2O cartridge case capacity

.357 SIG maximum C.I.P. cartridge dimensions.[1] All sizes in millimeters (mm).
Americans would define the shoulder angle at alpha/2=18 degrees. The common rifling twist rate for this cartridge is 406 mm (1 in 16 in), 6 grooves, Ø lands=8.71 mm, Ø grooves=9.02 mm, land width=2.69 mm and the primer type is small pistol.
Several sources have published contradicting information regarding .357 SIG headspacing.[3] This is due to originally designed as .357 (9.02mm)round but has been rapidly adapted to .355 (9mm) bullet. According to the official C.I.P. (Commission Internationale Permanente Pour L'Epreuve Des Armes A Feu Portatives) 2007 guidelines the .357 SIG headspaces on the shoulder (P2-H1). Some US sources concur this C.I.P. ruling.[4] US reloading supplier Lyman once published the .357 SIG headspaces on the case mouth (H2).
According to the C.I.P. guidelines the .357 SIG case can handle up to 305 MPa (44,236 psi) piezo pressure. In C.I.P. regulated countries every pistol cartridge combo has to be proofed at 130% of this maximum C.I.P. pressure to certify for sale to consumers.
The SAAMI pressure limit for the .357 SIG is set at 275.80 MPa (40,000 psi), piezo pressure.

The table below shows common performance parameters for several .357 SIG loads. Bullet weights ranging from 115 to 150 grains have been offered. Loads are available with energies from 488 (ft•lbf) to over 568 (ft•lbf), and penetration depths from 9 inches to over 16.5 inches are available for various applications and risk assessments.

Manufacturer	Load	Mass (grains)	Velocity (ft/s)	Energy (ft•lbf)	Expansion (inches)[6]	Penetration (inches)[6]	PC[6](cu in)	TSC[6] (cu in)
Triton	Quik-Shok	115	1425	518	frag	9.0	4.1	43.2 (est)
Winchester	Ranger T	125	1385	532	0.75	11.5	5.1	45.0 (est)
Federal	Premium JHP	125	1430	568	0.62	12.7	3.8	49.5 (est)
Speer	Gold Dot JHP	125	1385	532	0.68	16.5	6.0	45.0 (est)
Remington	JHP	125	1350	506	0.57	14.3	3.6	41.7 (est)
Federal	Premium JHP	150	1210	488	0.60	15.0	4.2	39.4 (est)

The goal of the .357 SIG project was to offer a level of performance equal to the highly effective 125 grains (8.1 g) .357 Magnum load. The .357 SIG accomplishes this with a 125 grains (8.1 g) bullet at a muzzle velocity of 1,450 feet per second (440 m/s) out of a 4 in (102 mm) barrel, which is generally identical to the velocity achieved by standard factory 125 grains (8.1 g)r .357 Magnum loads out of a 4 in (102 mm) revolver barrel.[citation needed](A check of advertised ballistics both in articles from the late 1990s & current ballistics tables from ammunition manufacturers show commonly a nominal velocity of 1,350fps for the .357 SIG with a 125gr bullet in a 4" bbl.) The .357 SIG gains extra muzzle velocity when fired from a longer barrel, like an after-market drop-in 6 in (152 mm) barrel.(This might achieve a velocity of 1450fps.)
With a simplistic approach to physics, recoil being directly proportional to "muzzle velocity x bullet mass" (due to conservation of momentum), the recoil of the .357 SIG is equal to or slightly less than that of the .40 S&W, and less than that of the full-power 10 mm Auto loads or the original .357 Magnum, Handgun Recoil table as well as Federal and.This simple approach to recoil is only part of the story as it is not only the properties of the bullet that produce recoil, a more important effect is the rocket like blast of propellant gases coming out of the barrel, after the bullet leaves the muzzle, that plays a greater role in the felt recoil.            

A more accurate view on recoil is that it is proportional to the mass of all ejecta x velocity of ejecta. Even so, recoil calculated in this manner is only the starting point in a comparison with the .357 Magnum cartridge, since the latter is used in a revolver, in which all the recoil energy is due to the Bullet and propellant, while the .357 SIG cartridge is frequently used in a semi-automatic pistol of recoil operation, in which a significant portion of the recoil energy is diverted to cycle the action, effectively prolonging the recoil phase
.
In comparing the energy levels of premium self-defense ammunition the muzzle energy of 584 ft.lbs (792 J) of the 125 grains (8.1 g) 1,450 feet per second (440 m/s) .357 SIG load is higher than either the 475 ft·lbf (644 J) generated by a 155 grains (10.0 g) 1,175 feet per second (358 m/s) Speer GoldDot .40 S&W load or the 400 ft·lbf (540 J) generated by a 180 grains (12 g) 985 feet per second (300 m/s) Speer GoldDot .40 S&W load.
Like the 10 mm Auto, the .357 SIG can be down-loaded to reduce recoil, to the point where recoil is similar to that of a 9x19mm Parabellum. However, since the .357 SIG uses bullets that are generally the same as those used in the 9 mm Para,downloading it to this point would defeat the purpose of having the SIG cartridge in the first place, as the .357 SIG casing was designed to handle up to 160gr. bullets whereas 9mm max out at ~140gr. and to download for recoil and ballistics to be identical to the less-powerful 9 mm cartridge would be a waste of time.
Because the .357 SIG fires at relatively high pressures, muzzle flash and noise are significant with standard loads, even with longer barrels. Utilizing loads with specialized powders and experimenting with different bullet weights can reduce flash.